IMEM electric transformers are applicable
to industries systems, shopping malls, and diverse loads.

This is the most used transformer for the industrial electrification, and it is designed for outdoors installation service with a great variety of high and low voltage connections, according to the specifications flexibility.

Considering all the accessories and different arrangements, the soaking period can be adjusted to your needs.

Designed to comply with the international standards specifications.

Column type transformers cores are built with M3-MOH grain oriented silicon steel sheet that has been heat CARLITE ™ treated; 3 leg-core with a 45ºcut and or armored 5 legs; 0.23mm., 0.009-inch, high magnetic permeability with insulation coat to resist 820ºC temperature.

HV coils are built with electric conductors coated with class 150ºC varnish and under voltage coils with very low resistance electrolytic copper or aluminum, covered with electrostatic dust baked-on 180ºC epoxy and/or paper coat to endure the oil exposition and avoiding deterioration of their properties.

The coil insulations used are class 120ºC made of kraft paper coated with epoxy resin in a rhombus shape on both sides, insulation cardboard, and crepe paper.

The tanks are subjected to a surface preparation chemical process to attain the adequate fitting for the coating and/or sandblasted with electrostatic or liquid steel pellets and paint. NYNAS is the type of naphthenic oil obtained from the crude oil fractional distillation, prepared and refined for its use in high voltage electrical equipment.
Upon request, any type of dielectric insulation liquid R-TEMP, SILICONE, nonflammable.